2005 Lotus Elise
"I finally got mine today, it took me 10 minutes to take off and 10 minutes to put the new one on (by myself) and without lifting the car. Perfect fit and amazing craftsmanship, better than the OEM!!!" - William, Miami FL.


2008 Lotus Elise
"No track time yet but I didn't notice any additional understeer in the first few test drives on the local twisties. Hopefully I can decide on a splitter soon. Much thanks to Glenn in his excellent customer service!." - Mike, McComb MS.

2006 Lotus Exige
"I got the diffuser Friday and got it installed in 15 minutes. Looks AWESOME. I am also running a large custom motorsports wing with some fabricated adjustable height stands. Based on some very preliminary runs, it looks like the wing is grabbing more of the clean air generated by this larger diffuser and it is actually beneficial now for me to take the wing height all the way down to it's lowest position. Greater downforce with less drag, and a wing closer to the body line of the car doesn't look too shabby either."
- Steven, Placentia CA.

2006 Lotus Elise
"
Glenn, Thanks for the quick response. The car definitely feels more "solid" above 50 mph. SouthBay AutoHaus did the install, along with a VF II supercharger and VF muffler. It is now a completely different car, in a good way.
You do nice work and your service matches, always refreshing." - John, Hawthorne CA.

2006 Lotus Exige
"I was on my way home from the 13hr headlight brigade race at VIR last night when I took on a sleeping deer in the middle of the highway. My headlights are aimed low and I didn't have enough time to swerve. I thought for sure my front clam was going to be mangled, but thankfully it wasn't. It made one heck of a bang though! Check out the diffuser, sharp as a knife! Must have cut that deer like swiss cheese. I kind of wanted to go back to see if the deer was sliced into several pieces then wondered what the deer would have looked like if I had the 5 or 7 element."
-Aaron, Summerfield NC.

2005 Lotus Elise
"Around 80 MPH the car has tended to want to "shift" less, and feels slightly more grounded. The rear end seems less twitchy compared to just a front splitter/stock diffuser during this weekends canyon drive. So I highly recommend any diffuser upgrade if you have front aero done. The windnoise above speeds of 45mph have decreased significantly compared to stock diffuser/exhaust exit.
The product looks very professionally made and came to me very well packaged. Much better than expected from a start-up company." - Joachim, Littleton CO.

2006 Lotus Exige
"It finishes the aero package nicely: Railer + CF Exige Splitter + CF Canards + 1650 mm wing). The Railer weighed in 12.6 lbs versus 6.4 lbs for the stock diffuser. I've lowered my ride height by 10 mm, so the railer is 4.25" from the ground. It's still very driveable. I have a 3.5" lip where my driveway drops off to the city street; it takes care but I can clear easily without scraping." - Amber, Lake Jackson TX.


NSX - 5 ELEMENT ORIGINAL (rounded)
Weight: 14 lbs
Cutting/Drilling Required?: No, but it's recommended.
Compatibilty: 2002-2005 NSX & 1991-2001 NSX w/ DF Valance.
Description: Give your NSX that up to date look with our agressive 5 element diffuser! It's street friendly and the body of the diffuser extends all the way up to the rear frame. The diffuser also fits on the 1991-2001 NSX if you have the DF rear valance. Hardware included.
Price: $600.00 + shipping /// BUY NOW

NSX - 5 ELEMENT RAILER (square)
Weight: 15 lbs
Cutting/Drilling Required?: No, but it's recommended.
Compatibilty: 2002-2005 NSX & 1991-2001 NSX w/ DF Valance.
Description: Give your NSX that up to date look with our agressive 5 element diffuser! This diffuser is more track oriented than our original diffuser. The fins are sharper and more squared off, and it's an inch longer out the rear than our original diffuser. Meant for the track.
Price: $600.00 + shipping /// BUY NOW


GTR - 3 ELEMENT
Weight: 15 lbs
Cutting/Drilling Required?: No. Direct Replacement.
Compatibilty: 2009-2011
Requirements: This is a direct replacement for your OEM diffuser. Unbolt your stock diffuser, and bolt this on with the supplied bolts.
Description: Give your GTR that mean look that it deserves with our beautiful 3 element diffuser. Better stability, less drag.
Price: $850 + shipping /// BUY NOW

GTR - 5 ELEMENT
Weight: 16 lbs
Cutting/Drilling Required?: No. Direct Replacement.
Compatibilty: 2009-2011
Requirements: This is a direct replacement for your OEM diffuser. Unbolt your stock diffuser, and bolt this on with the supplied bolts.
Description: Give your GTR that mean look that it deserves with our beautiful 5 element diffuser. Better stability, less drag.
Price: $850 + shipping /// BUY NOW


EVORA - 7 ELEMENT
Weight: 9lbs
Cutting/Drilling Required?: No. Direct Replacement.
Compatibilty: 2010-2011 Lotus Evora (Non Supercharged)
Requirements: This is a direct replacement for your OEM diffuser. Unbolt your stock diffuser, and bolt this on. Transfer your grills.
Description: Make the rear of your Evora look mean. The fins will provide more downforce and the longer body helps decrease drag.
Price: $750.00 + Shipping /// BUY NOW


ELISE/EXIGE - 3 ELEMENT ORIGINAL (rounded)
Weight: 9 lbs
Cutting/Drilling Required?: No. Direct Replacement.
Compatibilty: 2005-2010 Elise, Exige and Cup Car
Description: This diffuser is similar to the stock diffuser on the elise and exige, but the fins are longer for better air channeling. The fins also extend further towards the front of the diffuser. You have the option to have an exhaust hole cutout or no exhaust hole cutout.
Price: $525.00 + Shipping /// BUY NOW

ELISE/EXIGE - 5 ELEMENT ORIGINAL (rounded)
Weight: 10 lbs
Cutting/Drilling Required?: No. Direct Replacement.
Compatibilty: 2005-2010 Elise, Exige and Cup Car
Description: Take our 3 element diffuser, add 2 fins in the middle and you get our 5 element original diffuser. This is one of our most popular diffusers because it looks so beautiful in real life. Increase your downforce & improve airflow. Exhaust hole cutout available.
Price: $550.00 + Shipping /// BUY NOW

ELISE/EXIGE - 7 ELEMENT ORIGINAL (rounded)
Weight: 11 lbs
Cutting/Drilling Required?: No. Direct Replacement.
Compatibilty: 2005-2010 Elise, Exige and Cup Car
Description: The added 4 fins in the middle of the diffuser will channel the air out the back of the car more directly, decreasing drag & improving downforce. This diffuser will only work with an over the diffuser exhaust. No exhaust hole cutouts on this diffuser.
Price: $600.00 + Shipping /// BUY NOW

ELISE/EXIGE - 5 ELEMENT RAILER JR. (square)
Weight: 11 lbs
Cutting/Drilling Required?: No. Direct Replacement.
Compatibilty: 2005-2010 Elise, Exige and Cup Car
Description: Works with an over the diffuser exhaust system or we can put a hole in the middle for stock/supercharged exhaust tips. This is the same diffuser as the 5 element original, but with squared off edges for even better air channeling and downforce.
Price: $600.00 + Shipping /// BUY NOW

ELISE/EXIGE - 7 ELEMENT RAILER JR. (square)
Weight: 11 lbs
Cutting/Drilling Required?: No. Direct Replacement.
Compatibilty: 2005-2010 Elise, Exige and Cup Car
Description: Works with an over the diffuser exhaust system only. There are no holes cut to fit a thru-diffuser exhaust setup. This is the same diffuser as the 7 element original but the fins are squared off. This diffuser looks very aggressive and feels superb at high speeds.
Price: $625.00 + Shipping /// BUY NOW

ELISE/EXIGE - 5 ELEMENT RAILER (square)
Weight: 11 lbs
Cutting/Drilling Required?: No. Direct Replacement.
Compatibilty: 2005-2010 Elise, Exige and Cup Car
Description: Works with an over the diffuser exhaust system or we can put a hole in the middle for stock/supercharged exhaust tips. The diffuser is very aggressive and the fins sit parallel to the ground at 4 inches off the ground. This diffuser is perfect for the track.
Price: $650.00 + Shipping /// BUY NOW

ELISE/EXIGE - 7 ELEMENT RAILER (square)
Weight: 12 lbs
Cutting/Drilling Required?: No. Direct Replacement.
Compatibilty: 2005-2010 Elise, Exige and Cup Car
Description: Works with an over the diffuser exhaust system only. There are no holes cut to fit a thru-diffuser exhaust setup.The diffuser is very aggressive and the fins sit parallel to the ground at 4 inches off the ground. The ultimate track diffuser.
Price: $675.00 + Shipping /// BUY NOW

ELISE/EXIGE - CUSTOM
Weight: 9 - 12 lbs
Cutting/Drilling Required?: No. Direct Replacement.
Compatibilty: 2005-2011 Elise, Exige and Cup Car
Description: Let us know exactly what you want your diffuser to look like and how you want it to treat you on the track/street. We'll do a complete custom job for you. Whether you want your diffuser to have 20 fins, or no fins at all... hot pink or flat black, we can do it.
Price: $700.00 + Shipping - Email us with details.

ELISE/EXIGE - EXHAUST HOLE COVER PLATES
Weight: <1 lbs
Cutting/Drilling Required?: Drilling (Hardware Included).
Compatibilty: 2005-2010 Elise, Exige and Cup Car
Description: Have you upgrade to an ''over the diffuser'' exhaust? If so, then you should cover up that old exhaust hole cut-out with the Difflow cover plate! Improve the airflow and look of your diffuser with this super light piece. Drill, Rivet or Velcro on to your old diffuser.
Price: $35.00 Shipped /// BUY NOW

ELISE/EXIGE - UNDERTRAY AERO PLATES
Weight: <1 lbs
Cutting/Drilling Required?: Drilling
Compatibilty: 2005-2010 Elise, Exige.
Description: The Aero Plates attach to your diffuser and undertray to seal up the unnecessary open area behind the rear wheels. You can jack up your car and take turns as hard as you used to because our Aero Plates don't interfere with the movement of the suspension.
Price: $90.00 + shipping /// BUY NOW






Please EMAIL us or call: (4O6) 2O7-48OO if you would like to send a check/money order.